Description
This is a science-fiction assembly kit constructed from resin, white metal and/or other materials.
Here is Yamato's 1/3000 version of the Kazutaka Miyatak-designed Super Dimension Fortress, or SDF-1, from "Macross"! It's based on the data used for Yamato's masterpiece (and highly limited!) 1/2000 SDF-1 Prototype Replica kit--and best of all, Yamato has designed this SDF-1 to be loaded with gimmicks galore and to be transformable. That's right, this SDF-1 can change from its Force Mode to its Robot Mode! In this grand scale, the SDF-1 measures a monstrous 40cm (15.74 inches) in length. Made of ABS, POM, and metal, this epic model truly does justice to the awesome sense of hugeness and mechanical detail of the SDF-1! Instructions are in Japanese, but are easy to follow.
This very special limited release item is an unassembled, unpainted assembly kit version of Yamato's 1/3000 SDF-1 Macross (see the fully finished version listed below)! Includes special glow-in-the-dark markings.
Includes both full and "burnt down" versions of the main guns! (Only the burnt down version is shown here.)
This offer not available in Japan.
Details
Assembly Guide
Skill Level 3:
Basic Skills Required
Kits rated as skill level 3 are traditional model kits that require all basic modeling skills to complete. This includes cutting parts from runners and trimming or sanding them prior to use, assembling them with cement, and the use of paint to complete them.
To properly complete a level 3 kit, you should have at least a basic set of modeling supplies, including plastic nippers, a hobby knife, files and/or sandpaper, plastic cement, instant (cyanoacrylate) cement (for resin, soft-vinyl or metal parts), painting supplies including brushes, paint, thinner and masking tape, tweezers and possibly decal softener for applying decals to difficult areas.
Kits in this class are not suitable for small children unless there is complete parental supervision. Adults who have never before completed a plastic model kit may want to read one of the many excellent modeling guides available at most hobby shops before trying to build one of these kits.
Skill level 3 kits include a very large portion of our catalog. Most traditional plastic model kits fall into this category.
Cement Required

This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
Painting Required
This model kit or accessory must be painted in order to achieve a realistic appearance.

While there are slight differences depending on the country you live in, there are generally three types of paint available for modeling: Acrylic, Enamel and Lacquer. Their characteristics are described below.