Description
This is a tool for use in model assembly.
Convenient for cutting soft metal wire used in ship, aircraft, and railway models!
- Cuts ultra-fine wire flat without crushing it!
- Easy to cut even in tight spots near parts.
*Cutting Capability*
Different materials can be cut depending on the blade area with the 'Hybrid Edge'.
[Tip Side]
Ultra-fine wires such as metal lines (metal rigging) starting from 0.02 mm.
[Base Side]
Copper wire, brass wire, and metal lines (metal rigging) with a diameter of 0.5 mm or less.
- Stainless steel, piano wire, nickel silver wire, and spring materials are not applicable.
- Wires thicker than 0.5 mm are not applicable.
- Do not cut wires with a diameter of 0.5 mm at the tip side of the blade.