PRIVATE WAREHOUSE 
Description
This is an injection-plastic kit of a science-fiction/anime item.
The protagonist of 20th Kamen Rider title "Kamen Rider Zi-O" gets a Figure-rise Standard kit release from Bandai! The complex coloring of his suit has been recreated through the use of separate parts, and he even features silver plated and clear parts, too. His joints allow for a wide range of motion, so you can recreate the Rider Kick as well as other poses from the series.
The Ziku-Driver is rotatable, and the Zikan Girade can be displayed in either Gun Mode or Sword Mode through the use of optional parts. Order today!
[Includes]:
- Zikan Girade
- Gripping hand (right, left)
- Open hand (right, left)
- Weapon holding hand (right)
- Hand for signature pose (left)
- Display base
- Foil sticker sheet
- Name sticker
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
Cement Required
This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
Painting Required
This model kit or accessory must be painted in order to achieve a realistic appearance.
While there are slight differences depending on the country you live in, there are generally three types of paint available for modeling: Acrylic, Enamel and Lacquer. Their characteristics are described below.