FIRST TIME? 
Description
This is an injection-plastic kit of a science-fiction/anime item.
Kamen Rider Ghost Ore Soul from "Kamen Rider Ghost" joins the Figure-rise Standard model-kit lineup from Bandai! His characteristic hoodie is carefully reproduced, as are the precise lines of his body; the Ghost Driver is made with clear parts. Combine the Transient Form with the Ore Ghost parts to enter the Ore Soul state! Various interchangeable hands are included, and his Gun Gun Saver comes with one blade mode and one gun mode. Parts to equip him with the Neo Decadriver are included, as is a base for display. Place your order today!
[Includes]:
- Gun Gun Saver Blade Mode
- Gun Gun Saver Gun Mode
- Parts for Ore Ghost (x1 set)
- Base for Ore Ghost
- Joint parts (x1 set)
- Hand parts (x1 set)
- Figure-rise base
- Sticker
- Plastic seal
Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
No Cement Required
This item does not require the use of cement to complete. Some modelers prefer to use cement on snap-together kits in order to fix them into a particular pose, or make a joint more secure. However, this is not required to complete these kits.
No Painting Required
This item does not require painting.
Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.