Description
This is an injection-plastic kit of a science-fiction/anime item.
Kotobukiya unveils a new "Evangelion: 3.0+1.0" plastic model kit of the EVA UNIT-01 wielding the Spear of Cassius! The jaws can open and close in a way that replicates the movement from the movie and the entry plug can be pulled out in conjunction with the rear block. The front of the thighs and kneecaps are interlocking and movable and even the throat is articulated. The unit's knife can be deployed from the shoulder with the use of interchangeable parts. A ton of parts come pre-painted, allowing you to assemble the model and display it easily. Order today!
- [Size]: Approximately 19cm
- [Materials]: PS, PE, ABS, PVC
[Set Contents]:
- Spear of Cassius
- Entry Plug
- Umbilical Cable
- Progressive Knife
- Palette Rifle
- Replacement parts for knife deployment on shoulder
- Rear replacement parts with 3mm holes that are also compatible with the M.S.G New Flying Base (sold separately)
- Decals (arm and shoulder markings)
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
Cement Required

This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
Painting Required
This model kit or accessory must be painted in order to achieve a realistic appearance.

While there are slight differences depending on the country you live in, there are generally three types of paint available for modeling: Acrylic, Enamel and Lacquer. Their characteristics are described below.