Description
This is an injection-plastic kit of a science-fiction/anime item.
Celebrating the 25th anniversary of "Nekeetsu Saikyo Go-Saurer," Bandai releases its outstanding HG Go-Saurer! The kit snaps together so glue is not necessary, and it's molded in color so paint isn't needed either (although, as with many model kits, it'll look even more awesome with some paint)! The three robot dinosaurs Mech Ptera, Land Stego and Thunder Brachio are also included; they combine into the Saurer Jet! Go-Saurer is armed with his Saurer Blade and Saurer Shield. You need this iconic robot in your collection -- order him today!
[Includes]:
- Saurer Blade
- Saurer Shield
- Foil stickers for markings
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
No Cement Required

This item does not require the use of cement to complete. Some modelers prefer to use cement on snap-together kits in order to fix them into a particular pose, or make a joint more secure. However, this is not required to complete these kits.
No Painting Required
This item does not require painting.

Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.