FIRST TIME? 
Description
This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.
The long-awaited HG Leo is the 4th mobile suit in Bandai's "Gundam Evolution Project"! This project aims to enhance the Gunpla building experience, and features increased mobility and detail in each kit for a whole new building experience for fans.
The HG Leo features a new joint structure that allows the completed kit an outstanding range of motion, while shortening the joint assembly time. The joint parts can be fitted in afterwards, allowing fans who like to paint their kits an easier experience as well. The head features a clear part, so no stickers are required. The HG Leo comes equipped with a 105mm rifle, beam saber and shield, and the handle of the beam saber can be stored in the back of the shield. Order today, and create your own army of Leos!
[Includes]:
- 105mm rifle (x1)
- Beam saber (x2)
- Shield (x1)
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
No Cement Required
This item does not require the use of cement to complete. Some modelers prefer to use cement on snap-together kits in order to fix them into a particular pose, or make a joint more secure. However, this is not required to complete these kits.
No Painting Required
This item does not require painting.
Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.