FIRST TIME? 
Description
This is an injection-plastic kit of a science-fiction/anime item.
From "DEATH STRANDING" by Kojima Productions comes the bike ridden by the protagonist, Sam Porter Bridges - the "Reverse Trike" - now joining Kotobukiya's plastic model lineup!
[Model Specifications]
- "On-Road Mode" and "Off-Road Mode" can both be recreated with this model kit.
- Two types of specialized stands are included so the bike can be independently displayed no matter the mode.
- The front and rear tube parts are made with a soft material to be adjusted flexibly depending on how the bike is displayed.
- The bike can accommodate a large amount of cargo, just like from the game.
- Three types of cargo are included.
- Various marking decals are included.
- The separately sold Ludens can be placed on the seat to take a ride, too!
- [Figure Size]: Approximately 19.5cm in length
- [Materials]: PS, ABS, Rubber
Details
Assembly Guide
Skill Level 3:
Basic Skills Required
Kits rated as skill level 3 are traditional model kits that require all basic modeling skills to complete. This includes cutting parts from runners and trimming or sanding them prior to use, assembling them with cement, and the use of paint to complete them.
To properly complete a level 3 kit, you should have at least a basic set of modeling supplies, including plastic nippers, a hobby knife, files and/or sandpaper, plastic cement, instant (cyanoacrylate) cement (for resin, soft-vinyl or metal parts), painting supplies including brushes, paint, thinner and masking tape, tweezers and possibly decal softener for applying decals to difficult areas.
Kits in this class are not suitable for small children unless there is complete parental supervision. Adults who have never before completed a plastic model kit may want to read one of the many excellent modeling guides available at most hobby shops before trying to build one of these kits.
Skill level 3 kits include a very large portion of our catalog. Most traditional plastic model kits fall into this category.
Cement Required
This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
No Painting Required
This item does not require painting.
Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.