Description
This is an injection-plastic kit of a science-fiction/anime item.
Asura Archer is back in Kotobukiya's Megami Device lineup! Once fully assembled, she'll be about 14cm tall and completley posable; she has three interchangeable faces, numerous interchangeable hands, and lots of armor and weaponry parts, including her trademark bow! She can also use parts from the MSG series, Frame Arms, and other Frame Arms Girls; you can even combine some of her armor parts with those of Megami Device Asura Ninja (sold separately) to create a samurai warrior armed with a sword! Don't miss out, order her now!
Note: This kit features mostly snap-fit assembly, but some parts may require glue.
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
No Cement Required

This item does not require the use of cement to complete. Some modelers prefer to use cement on snap-together kits in order to fix them into a particular pose, or make a joint more secure. However, this is not required to complete these kits.
No Painting Required
This item does not require painting.

Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.