After click "Buy Now", the item are placed in PRIVATE WAREHOUSE.

Description

This is a fundamental building material for use in scratch-building or customizing models.

This is Magnet Setter 2, a magnetic sheet that can be used as a receiver for neodymium magnets. Made of a soft material that fits even on curved surfaces, with a thickness of approximately 0.2mm, it allows for the creation of magnet receivers even on small parts with minimal thickness where embedding magnets is challenging.

For circular cut types, please note:
Due to the punching process, there may be slight curvature in an arch shape. When applying, be sure to press firmly to adhere the center closely. Pressing with the rounded end of a ballpoint pen or similar can help achieve good adhesion.

Please note:

• Using model enamel paint for weathering with solvents may reduce the adhesive strength. Avoid prolonged exposure to solvents.
• If adhesion is insufficient, reinforce with instant adhesive or epoxy adhesive.
• As it is made of cut metal, handle with care to avoid injury from sharp edges.

Sheet size: Width 49mm, Depth 40mm, Thickness 0.2mm
Seal size: Individual size: Diameter 2.9mm, Thickness 0.2mm
Country of origin: Made in Japan