After click "Buy Now", the item are placed in PRIVATE WAREHOUSE.

Description

This is a tool for use in model assembly.

Product Description:

This is a jig designed to precisely drill straight holes into the ends (core) and sides of plastic round rods. It ensures accurate drilling of 2mm, 3mm, 4mm, and 5mm diameter plastic rods, eliminating the common problem of misalignment during manual drilling.

Key Features:

• Compatible Rod Sizes: 2mm, 3mm, 4mm, and 5mm plastic round rods
• Drill Size: Specifically designed for 1mm diameter drill bits
• Recommended Drill: Use a 1mm-shank drill with a small-diameter tip for holes smaller than 1mm in diameter
• Required Drill Length for Core and End Face Processing: Drill bit length of 18mm or more

Important Notes:

• Accuracy: Ensure that the plastic rods are within the specified size range (The tolerance range is +0 to 0.05mm.) for precise results.
• Drill Bit Size: Always use the recommended size of drill bit. Incorrect sizes may result in degraded hole quality or difficulty in removing the bit.
• Surface Damage: Minor surface scratches may be present, but they should not affect performance.
• Recommended Drill: Use a NACHI (Fuji) steel drill bit for optimal results. Drilling may require a "hole clearing" process on the first use to remove excess plating thickness.

Specifications:

• Compatible Plastic Rod Sizes: 2.0mm, 3.0mm, 4.0mm, and 5.0mm diameter (tolerance: +0.05mm)
• Jig Size: W25mm x D30mm x H8mm
• Material: Brass (plated)
• Country of Origin: Japan