Description
This is an injection-plastic airliner model kit.
This kit from Avis is a new mold! The Skycar is a small airplane designed and developed by the Ford Motor Company designer William Bushnell Stout, who also developed the famous Ford Trimotor. The Skycar was designed to answer the need for a small personal aircraft that was as easy to maneuver as a car. The Skycar I was completed in 1931, and was used for several years as a private plane by Stout himself. The Skycar II was completed in 1941; it had a stainless steel body and four-wheel landing gear, and was essentially a powered-up version of the Skycar I. It was tested by the U.S. Army Air Force as the XC-65 transport aircraft. The Skycar III was made in 1943 and the Skycar IV in 1944, but neither was mass-produced and only one prototype of each was made.
- [Size]: Approximately 10.5cm long when completed
- [Includes]: Decals for one version
Details
Assembly Guide
Skill Level 3:
Basic Skills Required
Kits rated as skill level 3 are traditional model kits that require all basic modeling skills to complete. This includes cutting parts from runners and trimming or sanding them prior to use, assembling them with cement, and the use of paint to complete them.
To properly complete a level 3 kit, you should have at least a basic set of modeling supplies, including plastic nippers, a hobby knife, files and/or sandpaper, plastic cement, instant (cyanoacrylate) cement (for resin, soft-vinyl or metal parts), painting supplies including brushes, paint, thinner and masking tape, tweezers and possibly decal softener for applying decals to difficult areas.
Kits in this class are not suitable for small children unless there is complete parental supervision. Adults who have never before completed a plastic model kit may want to read one of the many excellent modeling guides available at most hobby shops before trying to build one of these kits.
Skill level 3 kits include a very large portion of our catalog. Most traditional plastic model kits fall into this category.
Cement Required

This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
Painting Required
This model kit or accessory must be painted in order to achieve a realistic appearance.

While there are slight differences depending on the country you live in, there are generally three types of paint available for modeling: Acrylic, Enamel and Lacquer. Their characteristics are described below.