FIRST TIME? 
Description
This is a sheet of water-slide or dry transfer decals for marking aircraft models.
Released by Quinta Studio in Ukraine, these are the "3D Decals" for aircraft kit interiors!
These products, which are thickly printed on a resin base, precisely reproduce instrument panels and console panels.
To use them, soak the printed parts in lukewarm water as you would decals, remove the printed parts from the base paper, and then adhere them to the parts of the kit that have been flattened by scraping off the mold where they are to be attached, using PVA glue (woodworking glue) or epoxy glue. Take this opportunity to try them out!
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
Cement Required
This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
No Painting Required
This item does not require painting.
Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.