Description
This is an injection-plastic military vehicle model kit.
This kit is a completely new mold! This is a main battle tank originally improved by Poland, which acquired the licensed production rights for the Vickers 6t tank in 1931. Since the engine was changed from an air-cooled horizontally opposed 4-cylinder version to a liquid-cooled upright 6-cylinder engine, the engine room, including the radiator space, was enlarged and became the same height as the battle room. The armor thickness was also strengthened, and the suspension also strengthened accordingly to handle the extra weight. Production began in 1934; initially a twin-turret type with two machine gun towers was produced like the Vickers 6t, and from 1937 a single-turret type equipped with an in-vehicle Bofors 37mm gun was produced. By the time of the 1939 campaign, about 100 7TP single-turret tanks had been produced, and were used as powerful main battle tanks.
This kit includes a high level of detail, including the inside of the turret with its main gun, coaxial machine gun, sighting machine and swivel handle. A radio is also reproduced at the rear of the turret. The hatches can be built opened or closed; you can easily view the unique shape of the engine room, and the layout of the ammunition box and the drive. The tracks are an assembly type for a high level of detail, too. Order yours today!
Details
Assembly Guide
Skill Level 3:
Basic Skills Required
Kits rated as skill level 3 are traditional model kits that require all basic modeling skills to complete. This includes cutting parts from runners and trimming or sanding them prior to use, assembling them with cement, and the use of paint to complete them.
To properly complete a level 3 kit, you should have at least a basic set of modeling supplies, including plastic nippers, a hobby knife, files and/or sandpaper, plastic cement, instant (cyanoacrylate) cement (for resin, soft-vinyl or metal parts), painting supplies including brushes, paint, thinner and masking tape, tweezers and possibly decal softener for applying decals to difficult areas.
Kits in this class are not suitable for small children unless there is complete parental supervision. Adults who have never before completed a plastic model kit may want to read one of the many excellent modeling guides available at most hobby shops before trying to build one of these kits.
Skill level 3 kits include a very large portion of our catalog. Most traditional plastic model kits fall into this category.
Cement Required

This item requries the use of cement (glue) to complete. For injection-plastic kits, use the weld-type clear cement specifically designed for use on styrene plastic. For some smaller parts, you may wish to use instant type (cyanoacrylate) glue. For resin, white metal, soft vinyl and photo-etched materials, the use of instant type cement is strongly recommended.
A SAFETY NOTE ABOUT INSTANT CEMENT
Parents and all modelers should note that instant cement (cyanoacrylate) bonds skin instantly. While this in itself is not harmful, forcibly attempting to pull the skin apart can tear the skin and cause injury. If you or your child happens to inadvertenly glue themselves with instant cement, don't pull, but use remover for instant cement, or nail polish remover to dissolve the bond instead.
Painting Required
This model kit or accessory must be painted in order to achieve a realistic appearance.

While there are slight differences depending on the country you live in, there are generally three types of paint available for modeling: Acrylic, Enamel and Lacquer. Their characteristics are described below.