FIRST TIME? 
1/144 RG Unicorn Gundam 02 Banshee Norn (Premium "Unicorn Mode" Box)
Description
This is a posable, Real-Grade injection-plastic kit of an item from the Gundam universe.
The Unicorn Gundam 02 Banshee Norn gets a Real Grade model kit release from Bandai! This limited version includes a special "Unicorn Mode" box (the only difference between these two kits is the packaging). It features a flexible inner frame for supreme posability after assembly, and it can transform into its Banshee Norn mode, too! It's equipped with two Beam Sabers, the Beam Magnum and an effect part, the Revolving Launcher, the Armed Armor DE, the Armed Armor XC, and realistic decals. Check out the regular version, too!
[Includes]:
- Beam Magnum
- Revolving Launcher
- Beam Saber (x2)
- Armed Armor DE
- Armed Armor XC
- Realistic decals
Details
Assembly Guide
Skill Level 2:
Easy to Complete
Skill Level 2 kits require basic plastic model assembly techniques, such as cutting parts from the runners, and cutting or sanding away the remains of the gates (the place where the part was connected to the runner). Some kits in this level also provide stickers for some markings. Most level 2 kits do not require cement or paint, but be sure to read any additional information provided to be sure. To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. In some cases, a pair of tweezers makes applying stickers easier. Most adults with no prior modeling experience would have no trouble completing a kit of skill level 2. Parents would probably want to assist younger children with a kit of this level if they have never built one before.
No Cement Required
This item does not require the use of cement to complete. Some modelers prefer to use cement on snap-together kits in order to fix them into a particular pose, or make a joint more secure. However, this is not required to complete these kits.
No Painting Required
This item does not require painting.
Either the item is completely pre-painted, such as an action figure or other completed figure, or it is molded in the colors of the finished item so that it appears natural after you have assembled it. Note that kits which are molded in their final colors will always look better when painted, even if this is not required. At the very least, a light coat of flat clear spray will make a science-fiction kit look much less toy-like after assembly. The same goes for some action figures as well.